Han Changxiu, Han Xinyu, Yang Li, Liu Shuangxi, Zhang Baogui. Removal of arsine in PH3 by Fe-based alloy[J]. Chinese Journal of Environmental Engineering, 2010, 4(7): 1601-1604.
Citation:
Han Changxiu, Han Xinyu, Yang Li, Liu Shuangxi, Zhang Baogui. Removal of arsine in PH3 by Fe-based alloy[J]. Chinese Journal of Environmental Engineering, 2010, 4(7): 1601-1604.
Institute of New Catalytic Materials Science, College of Chemistry, Nankai University, Tianjin 300071，China
2.
College of Environmental Science & Engineering，Nankai University,Tianjin 300071,China
Received Date:
14/03/2010
Accepted Date:
20/11/2009
Fund Project:
Abstract
Fe-B amorphous alloy and Fe(Cu)P alloy were prepared. As dearsenic agents, their performances of removing arsine in PH3 were investigated. Results show that Fe(Cu)P alloy has the best removal performance such as lower operating temperature, higher removal capacity and lower preparation cost. The results also show that the removal performance of Fe-B amorphous alloy is better than that of Co-B amorphous alloy and zinc power.
Abstract: Fe-B amorphous alloy and Fe(Cu)P alloy were prepared. As dearsenic agents, their performances of removing arsine in PH3 were investigated. Results show that Fe(Cu)P alloy has the best removal performance such as lower operating temperature, higher removal capacity and lower preparation cost. The results also show that the removal performance of Fe-B amorphous alloy is better than that of Co-B amorphous alloy and zinc power.
Han Changxiu, Han Xinyu, Yang Li, Liu Shuangxi, Zhang Baogui. Removal of arsine in PH3 by Fe-based alloy[J]. Chinese Journal of Environmental Engineering, 2010, 4(7): 1601-1604.
Han Changxiu, Han Xinyu, Yang Li, Liu Shuangxi, Zhang Baogui. Removal of arsine in PH3 by Fe-based alloy[J]. Chinese Journal of Environmental Engineering, 2010, 4(7): 1601-1604.
DownLoad:
