[1] LO PRESTI D. Recycled tyre rubber modified bitumens for road asphalt mixtures: A literature review[J]. Construction and Building Materials, 2013, 49: 863-881. doi: 10.1016/j.conbuildmat.2013.09.007
[2] 杨志峰, 李美江, 王旭东. 废旧橡胶粉在道路工程中应用的历史和现状[J]. 公路交通科技, 2005, 22(7): 19-21. doi: 10.3969/j.issn.1002-0268.2005.07.005
[3] 颜鹤. 废胶粉改性沥青研究进展[J]. 科技创新导报, 2011, 14(1): 52-53. doi: 10.3969/j.issn.1674-098X.2011.01.040
[4] PEREIRA S M S, OLIVEIRA J R M, FREITAS E F, et al. Mechanical performance of asphalt mixtures produced with cork or rubber granulates as aggregate partial substitutes[J]. Construction and Building Materials, 2013, 41: 209-215. doi: 10.1016/j.conbuildmat.2012.12.005
[5] 许兢, 应祎, 钱庆荣, 等. 废胶粉改性沥青研究与应用现状[J]. 再生资源与循环经济, 2014, 7(6): 41-44. doi: 10.3969/j.issn.1674-0912.2014.06.012
[6] 郭朝阳, 何兆益, 曹阳. 废胎胶粉改性沥青改性机理研究[J]. 中外公路, 2008, 28(2): 172-176.
[7] ZHU J Q, BIRGISSON B, KRINGOS N. Polymer modification of bitumen: Advances and challenges[J]. European Polymer Journal, 2014, 54(1): 18-38.
[8] 张文武. 废胎胶粉改性沥青机理研究[D]. 重庆: 重庆交通大学, 2009.
[9] 于凯, 王欢, 韩赫兴, 等. 双氧水氧化废轮胎胶粉在改性沥青中的应用[J]. 天津大学学报(自然科学与工程技术版), 2014, 47: 949-954.
[10] 于凯, 张琛, 王欢, 等. 次氯酸钠氧化废轮胎胶粉对改性沥青性能的影响[J]. 环境工程学报, 2016, 10(1): 350-354. doi: 10.12030/j.cjee.20160157
[11] SHATANAWI K M, BIRO S, NASER M, et al. Improving the rheological properties of crumb rubber modified binder using hydrogen peroxide[J]. Road Materials and Pavement Design, 2013, 14: 723-734. doi: 10.1080/14680629.2013.812535
[12] 胡吉良, 杜丹超, 李晓林, 等. 硫化胶粉与脱硫胶粉改性沥青性能研究[J]. 特种橡胶制品, 2014(5): 20-24.
[13] 关庆文, 王仕峰, 张勇, 等. 脱硫胶粉改性沥青的研究[J]. 特种橡胶制品, 2009, 30(1): 28-30. doi: 10.3969/j.issn.1005-4030.2009.01.007
[14] 杜丹超, 李晓林, 郑广宇, 等. 脱硫胶粉改性沥青性能的研究[J]. 公路, 2012(6): 208-211. doi: 10.3969/j.issn.0451-0712.2012.12.049
[15] 康爱红. 活化废胶粉改性沥青机理研究[J]. 公路交通科技, 2008, 25(7): 12-16. doi: 10.3969/j.issn.1002-0268.2008.07.003
[16] FORMELA K, SULKOSKI M, SAEB M R, et al. Assessment of microstructure, physical and thermal properties of bitumen modified with LDPE/GTR/elastomer ternary blends[J]. Construction and Building Materials, 2016, 106: 160-167. doi: 10.1016/j.conbuildmat.2015.12.108
[17] XU O M, XIAO F P, HAN S, et al. High temperature rheological properties of crumb rubber modified asphalt binders with various modifiers[J]. Construction and Building Materials, 2016, 112: 49-58. doi: 10.1016/j.conbuildmat.2016.02.069
[18] ZHANG F, HU C B. The research for crumb rubber/waste plastic compound modified asphalt[J]. Journal of Thermal Analysis and Calorimetry, 2016, 124: 729-741. doi: 10.1007/s10973-015-5198-4
[19] FANG C Q, QIAO X T, YU R E, et al. Influence of modification process parameters on the properties of crumb rubber/EVA modified asphalt[J]. Journal of Applied Polymer Science, 2016, 133: 43598-43600.
[20] YAN K Z, XU H B, YOU L Y. Rheological properties of asphalts modified by waste tire rubber and reclaimed low density polyethylene[J]. Construction and Building Materials, 2015, 83: 143-149. doi: 10.1016/j.conbuildmat.2015.02.092
[21] XU O M, CONG L, XIAO F P, et al. Rheology investigation of combined binders from various polymers with GTR under a short term aging process[J]. Construction and Building Materials, 2015, 93: 1012-1021. doi: 10.1016/j.conbuildmat.2015.05.051
[22] CAI G D, YANG H Y, ZHU L D, et al. Toughening polystyrene by core-shell grafting copolymer polybutadiene-graft-polystyrene with potassium persulfate as initiator[J]. Journal of Industrial and Engineering Chemistry, 2013, 19: 823-828. doi: 10.1016/j.jiec.2012.10.024
[23] WONGTHONG P, NAKASON C, PAN Q, et al. Modification of deproteinized natural rubber via grafting polymerization with maleic anhydride[J]. European Polymer Journal, 2013, 49: 4035-4046. doi: 10.1016/j.eurpolymj.2013.09.009
[24] SONGSING K, VATANATHAM T, HANSUPALLAK N. Kinetics and mechanism of grafting styrene onto natural rubber in emulsion polymerization using cumene hydroperoxide-tetraethylenepentamine as redox initiator[J]. European Polymer Journal, 2013, 49: 1007-1016. doi: 10.1016/j.eurpolymj.2013.01.027
[25] PENG C C, ABETZ V. A simple pathway toward quantitative modification of polybutadiene: A new approach to thermoreversible cross-linking rubber comprising supramolecular hydrogen-bonding networks[J]. Macromolecules, 2005, 38: 5575-5580. doi: 10.1021/ma050419f
[26] RIYAJAN S A, SUKHLAAIED W. Effect of chitosan content on gel content of epoxized natural rubber grafted with chitosan in latex form[J]. Materials Science and Engineering C, 2013, 33: 1041-1047. doi: 10.1016/j.msec.2012.11.012
[27] SUKSAWAD P, YAMAMOTO Y, KAWAHARA S. Preparation of thermoplastic elastomer from natural rubber grafted with polystyrene[J]. European Polymer Journal, 2011, 47: 330-337. doi: 10.1016/j.eurpolymj.2010.11.018
[28] PUKKATE N, KITAI T, YAMAMOTO Y, et al. Nano-matrix structure formed by graft-copolymerization of styrene onto natural rubber[J]. European Polymer Journal, 2007, 43: 3208-3214. doi: 10.1016/j.eurpolymj.2007.04.037
[29] ASALETHA R, KUMARAN M G, THOMAS S. Thermal behaviour of natural rubber/polystyrene blends: Thermogravimetric and differential scanning calorimetric analysis[J]. Polymer Degradation and Stability, 1998, 61: 431-439. doi: 10.1016/S0141-3910(97)00229-2
[30] 唐晓红, 王瑾, 郑会勤, 等. 苯乙烯悬浮聚合的实验探索[J]. 化学与生物工程, 2012, 29(2): 44-45. doi: 10.3969/j.issn.1672-5425.2012.02.011