-
图 1 不同生物炭/氯化锌质量比条件下电极材料BET分析图
Figure 1. BET analysis chart of electrode materials at different biochar/zinc chloride mass ratios
-
图 2 不同煅烧温度条件下改性核桃壳生物炭拉曼光谱分析
Figure 2. Raman spectra analysis of modified walnut shell biochar at different calcination temperatures
-
图 3 不同生物炭/聚苯胺/热熔胶复合比例条件下扫描电镜分析
Figure 3. SEM analysis at different composite ratios of biochar/polyaniline/hot melt adhesive
-
图 4 不同生物炭/聚苯胺/热熔胶复合比例电极电化学分析
Figure 4. Electrochemical analysis of electrodes with different composite ratios of biochar/polyaniline/hot melt adhesive
-
图 5 接种脱氮菌的性能
Figure 5. Performance of inoculated denitrification bacteria
-
图 6 不同生物炭/氯化锌质量比条件下制备的电极材料
Figure 6. Electrode materials prepared at different biochar/zinc chloride mass ratios
-
图 7 不同煅烧温度条件下制备的电极材料
Figure 7. Electrode materials prepared at different calcination temperatures
-
图 8 不同BPP条件下制备的电极材料
Figure 8. Electrode materials prepared at different BPP conditions
-
图 9 改性核桃壳生物炭MFC处理模拟废水中污染物的去除效果
Figure 9. Removal effect of pollutants in simulated wastewater treated by modified walnut shell biochar MFC
Figure
9 ,Table
1 个