[1] 中华人民共和国生态环境部. 2020中国生态环境状况公报[R/OL]. (2021-05-26).https://www.mee.gov.cn/hjzl/sthjzk/zghjzkgb/202105/P020210526572756184785.pdf.
[2] 胡玮, 任碧琪, 黄玉虎, 等. 国内外储油库 VOCs 排放现状与标准分析[J]. 环境科学, 2020, 41(1): 139-145.
[3] Refueling vapor recovery: A history of U. S. experience with ORVR and stage II, a discussion on refueling emission generation and emissions from gasoline dispensing facilities, and a synopsis of ORVR and stage II implementation, in-use efficiency, and costeffectiviness [R]. Manufacturers of Emission Controls Association (MECA). 2020.01. cms. meca. org/resources/Refueling_Vapor_Recovery_WhitePaper_Final. pdf.
[4] 中华人民共和国生态环境部, 中华人民共和国国家市场监督管理总局. 加油站大气污染物排放标准: GB 20952-2020 [S/OL]. (2020.12. 28).https://www.mee.gov.cn/ywgz/fgbz/bz /bzwb/dqhjbh/dqgdwrywrwpfbz/202012/t20201231_815640.shtml.
[5] 北京市生态环境局, 北京市市场监督管理局. 加油站油气排放控制和限值: DB11/208-2019, [S/OL]. 2019.06. 13,http://sthjj.beijing.gov.cn/eportal/fileDir/bjhrb/resource/cms/2019/06/ 2019062117120472837.pdf.
[6] 朱玲, 陈家庆, 王耔凝. 车载加油油气回收ORVR系统应用进展[J]. 油气储运, 2015, 34(5): 469-476. doi: 10.6047/j.issn.1000-8241.2015.05.003
[7] 陈家庆, 朱玲. 油气污染排放与控制技术[M]. 北京: 中国石化出版社, 2010.
[8] 宫徵羽, 王春雨, 赵飞, 等. 酸碱盐改性对活性炭吸附油气特征的影响[J]. 环境工程学报, 2020, 14(5): 1276-1285. doi: 10.12030/j.cjee.201907124
[9] 许伟, 刘军利, 应浩, 等. 磷酸活化提升丁烷工作容量并制备高性能汽车碳罐用活性炭[J]. 环境工程学报, 2021, 15(6): 1946-1955. doi: 10.12030/j.cjee.202004088
[10] 李海亮. 国六碳罐设计简述[J]. 汽车实用技术, 2018(1): 41-44. doi: 10.16638/j.cnki.1671-7988.2018.01.014
[11] 何彦彬, 李长江. 国Ⅵ法规下的碳罐设计[J]. 汽车工程师, 2018(1): 37-40. doi: 10.3969/j.issn.1674-6546.2018.01.010
[12] 陈婷, 倪红, 谷雪景, 等. 中国移动源下阶段排放法规综述和分析[J]. 内燃机工程, 2018, 39(6): 24-30.
[13] BAI X. Multi-dimensional CFD simulation of adsorption/desorption processes in carbon canister[J]. Dissertation Abstracts International, 2004, 1539: 129-132.
[14] HOU X, XIN L, LIU Z, et al. Flow field simulation and experimental evaluation of carbon canister based on FLUENT[C]. International Conference on Computational Intelligence & Software Engineering. IEEE, 2010.
[15] LIN J S, DONG M, ALI S, et al. Vehicular emission performance simulation[C]. SAE World Congress & Exhibition. 2012.
[16] 黄远清, 王斐. 碳罐内通气阻力的数值模拟[J]. 北京汽车, 2013(6): 32-35. doi: 10.3969/j.issn.1002-4581.2013.06.009
[17] 翟豪瑞, 葛晓宏, 陈长秀, 等. 基于Moldex3D碳罐本体优化分析及模具设计[J]. 模具工业, 2018, 44(1): 40-45. doi: 10.16787/j.cnki.1001-2168.dmi.2018.01.010
[18] 李岳林, 何兴, 吴钢, 等. 车辆活性碳罐三维数值模拟研究[J]. 汽车工程学报, 2012, 2(6): 424-430. doi: 10.3969/j.issn.2095-1469.2012.06.05
[19] ZHAO F, ZHU L, WANG Z Z, et al. Experimental and numerical investigation of the mass and heat transfer processes of n-Butane adsorption on activated carbon[J]. ACS Omega, 2021, 6(27): 17162-17172. doi: 10.1021/acsomega.0c06273
[20] 周日峰, 石基弘, 刘全祯, 等. 活性炭吸附甲烷和甲苯的分子模拟研究[J]. 过程工程学报, 2018, 18(S1): 97-102. doi: 10.12034/j.issn.1009-606X.20180074
[21] 李树刚, 白杨, 林海飞, 等. CH4, CO2和N2多组分气体在煤分子中吸附热力学特性的分子模拟[J]. 煤炭学报, 2018, 43(9): 2476-2483.
[22] LI X Q, ZHANG L, YANG Z Q, et al. Adsorption materials for volatile organic compounds (VOCs) and the key factors for VOCs adsorption process: A review[J]. Separation and Purification Technology, 2020, 235: 116213. doi: 10.1016/j.seppur.2019.116213
[23] ZHANG X Y, GAO B, ANNE E C, et al. Adsorption of VOCs onto engineered carbon materials: A review[J]. Journal of Hazardous Materials, 2017, 338: 102-123. doi: 10.1016/j.jhazmat.2017.05.013
[24] 史怡坤, 李瑞江, 朱学栋, 等. 真空变压吸附制氧径向流吸附器的流动特性模拟[J]. 过程工程学报, 2021, 21(1): 19-26. doi: 10.12034/j.issn.1009-606X.220029
[25] 郑新港, 刘应书, 杨俊峰, 等. 基于计算流体力学的吸附过程模拟研究[J]. 北京工业大学学报, 2012, 38(1): 145-150.