碱金属硝酸盐对促进LDH基材料吸附CO2性能的影响

王君雅; 羊莹; 宁平

doi:10.12030/j.cjee.201808095

[1]

WANG J, HUANG L, YANG R, et al.Recent advances in solid sorbents for CO₂ capture and new development trends[J].Energy & Environmental Science,2014,7(11):3478-3518 10.1039/C4EE01647E

[2]

WANG Q, TAY H H, ZHONG Z, et al.Synthesis of high-temperature CO₂ adsorbents from organo-layered double hydroxides with markedly improved CO₂ capture capacity[J].Energy & Environmental Science, 2012,5(6):7526–7530 10.1039/C2EE21409A

[3]

MONDAL M K, BALSORA H K, VARSHNEY P.Progress and trends in CO₂ capture/separation technologies: A review[J].Energy,2012,46(1):431-441 10.1016/j.energy.2012.08.006

[4]

GAO Y, ZHANG Z, WU J, et al.Comprehensive investigation of CO₂ adsorption on Mg–Al–CO₃ LDH-derived mixed metal oxides[J].Journal of Materials Chemistry A,2013,41(1):12782-12790 10.1039/C3TA13039H

[5]

朱晨明, 王保登, 张中正, 等. 金属-有机骨架复合材料的制备及其二氧化碳吸附性能[J]. 化工进展,2016,35(9):2876-2884

[6]

ELONEVA S, SAID A, FOGELHOLM C J, et al.Preliminary assessment of a method utilizing carbon dioxide and steelmaking slags to produce precipitated calcium carbonate[J].Applied Energy,2012,90(1):329-334 10.1016/j.apenergy.2011.05.045

[7]

ZHAO B, TAO W, ZHONG M, et al.Process, performance and modeling of CO₂ capture by chemical absorption using high gravity: A review[J].Renewable and Sustainable Energy Reviews,2016,65:44-56 10.1016/j.rser.2016.06.059

[8]

BOBICKI E R, LIU Q, XU Z, et al.Carbon capture and storage using alkaline industrial wastes[J].Progress in Energy and Combustion Science, 2016,38(2):302-320 10.1016/j.pecs.2011.11.002

[9]

OLIVARES-MARIN M, DRAGE T C, MAROTO-VALER M M.Novel lithium-based sorbents from fly ashes for CO₂ capture at high temperatures[J].International Journal of Greenhouse Gas Control,2010,4(4):623-629 10.1016/j.ijggc.2009.12.015

[10]

IRURETAGOYENA D, HUANG X, SHAFFER M S P, et al.Influence of alkali metals (Na, K, and Cs) on CO₂ adsorption by layered double oxides supported on graphene oxide[J].Industrial & Engineering Chemistry Research,2015,54(46):11610-11618 10.1021/acs.iecr.5b02762

[11]

FICICILAR B, DOGU T.Breakthrough analysis for CO₂ removal by activated hydrotalcite and soda ash[J].Catalysis Today,2006,115(1/2/3/4):274–278 10.1016/j.cattod.2006.02.058

[12]

HUANG L, XU C, REN R, et al.Revealing how molten salts promote CO₂ capture on CaO via an impedance study and sorption kinetics simulation[J].Sustainable Energy & Fuels,2018,2(1):68-72 10.1039/C7SE00502D

[13]

高峰, 李存梅, 王媛, 等. 孙树脂基球状活性炭的制备及对二氧化碳吸附性能的研究[J]. 燃料化学学报,2014,42(1):116-170

[14]

陈爱兵, 于奕峰, 臧文伟, 等. 掺氮多孔碳在二氧化碳吸附分离中的应用[J]. 无机材料学报,2015,30(1):9-16

[15]

WANG Q, GAO Y, LUO J, et al.Synthesis of nano-sized spherical Mg₃Al–CO₃ layered double hydroxide as a high-temperature CO₂ adsorbent[J].RSC Advances,2013,3(10):3414–3420 10.1039/C2RA22607C

[16]

WANG Q, TAY H H, NG D J W, et al.The effect of trivalent cations on the performance of Mg-M-CO₃ layered double hydroxides for high-temperature CO₂ capture[J].ChemSusChem,2010,3(8):965-973 10.1002/cssc.201000099

[17]

艾宁, 姜哲, 徐茜, 等. 氨基改性层状双氢氧化物的制备及其二氧化碳吸附机理[J]. 化工学报,2013,64(2):616-623

[18]

WANG J.HUANG L, GAO Y, et al.A simple and reliable method for determining the delamination degree of nitrate and glycine intercalated LDHs in formamide[J].Chemical.Communications,2014,50(70):10130-10132 10.1039/C4CC05015K

[19]

LI S, SHI Y, YANG Y, et al.High-performance CO₂ adsorbent from interlayer?at moderate temperatures[J].Chemistry of Materials,2015,27(6):1943-1949 10.1021/cm503295g

[20]

HUANG L, WANG J, GAO Y, et al.Synthesis of LiAl₂-layered double hydroxides for CO₂ capture over a wide temperature range[J].Journal of Materials Chemistry A,2014,2(43):18454–18462 10.1039/C4TA04065A

[21]

LEE J M, MIN Y J, LEE K B, et al.Enhancement of CO₂ sorption uptake on hydrotalcite by impregnation with K₂CO₃[J].Langmuir,2010,26(24):18788–18797 10.1021/la102974s

[22]

王磊. 碱金属盐修饰MgO基CO₂吸附剂的制备及其结构:性能关系的研究[D]. 上海:华东理工大学,2017

[23]

QIAO Y, WANG J, ZHANG Y, et al.Alkali nitrates molten salt modified commercial MgO for intermediate-temperature CO₂ capture: optimization of the Li/Na/K ratio[J].Industrial & Engineering Chemistry Research,2017,56(6):1509-1517 10.1021/acs.iecr.6b04793

[24]

GAO W, ZHOU T, LOUIS B, et al.Hydrothermal fabrication of high specific surface area mesoporous MgO with excellent CO₂ adsorption potential at intermediate temperatures[J].Catalysts,2017,7(4):116-131 10.3390/catal7040116

[25]

GAO W, ZHOU T, GAO Y, et al.Molten salts-modified MgO-based adsorbents for intermediate-temperature CO₂ capture: A review[J].Journal of Energy Chemistry,2017,26(5):830-838 10.1016/j.jechem.2017.06.005

[26]

ZHANG K, LI X S, LI W Z, et al.Phase transfer-catalyzed fast CO₂ absorption by MgO-based absorbents with high cycling capacity[J].Advanced Materials Interfaces,2014,1(3):1400030 10.1002/admi.201400030