某1 000 MW机组电除尘器气固两相流数值模拟

刘含笑; 刘猛; 焦磊; 赵琳; 骆建友; 许东旭; 郭滢

doi:10.12030/j.cjee.201711169

[1]

MOKHTARZADEH-DEHGHAN M R,YUAN Y M．Measurements of turbulence quantities and bursting period in developing turbulent boundary layers on the concave and convex walls of a 90 square bend[J]．Experimental Thermal and Fluid Science,2002,27(1):59-75 10.1016/j.expthermflusci.20021303

[2]

NIKAS K S P, VARONOS A A．Numerical simulation of the flow and the collection mechanisms inside a laboratory scale electrostatic precipitator[J]．Journal of Electrostatics,2005,63 (5):423-443 10.1016/j.elstat.2004.12.005

[3]

SWAMINATHAN M R, MAHALAKSHMI N V.Numerical modelling of flow through perforated plates applied to electrostatic precipitator[J].Journal of Applied Sciences,2010,10(20):2426-2432

[4]

GUO B Y, HOU Q F, YU A B, et al.Numerical modelling of the gas flow through perforated plates[J].Chemical Engineering Research and Design,2013,91(3):403-408 10.1016/j.cherd.2012.10.004

[5]

齐晓娟,李凤瑞,周晓耘．电除尘器进口矩形烟道气流布改进的CFD 模拟[J]．环境工程学报,2011,5(2):404-408

[6]

邵毅敏,周俭基,熊绍武,等．电除尘器进气烟箱参数对气流分布影响的仿真研究[J]环境工程学报,2012,6(2):577-583

[7]

陈冠益,耿页,郑乐宇,等. 带有内撑结构的电厂烟道弯头压力损失数值模拟[J].中国电机工程学报,2013,33(增刊):153-159

[8]

刘忠,刘含笑,冯新新,等. 湍流聚并器流场和颗粒运动轨迹模拟[J].中国电机工程学报,2012,32(14):71-75

[9]

刘含笑,姚宇平,郦建国. 湍流场中颗粒破碎的数值模拟[J].环境工程学报,2015,9(8):3937-3943

[10]

李立锋,叶兴联,杨丁. 湿式电除尘器系统流场数值模拟分析[J].环境工程学报,2015,9(10):4959-4964

[11]

李婉婉,刘丽萍,贾燕,等. 某1 000 MW机组电除尘器前后烟道流场特性数值模拟及结构优化[J].热力发电,2016,45(9):15-22

[12]

贾燕,崔浩,李婉婉,胡国明. 三室电除尘器前烟道的数值模拟与结构优化[J].热能动力工程,2016,31(9):88-93

[13]

何林菊,骆建友,赵胜清,等.低温电除尘器数值模拟研究[J]. 环境工程,2014,32(S):391-394

[14]

袁伟锋, 周统. 低低温电除尘系统改造数值试验研究[C]//中国环保产业协会电除尘委员会.第十七届中国电除尘学术会议论文集.合肥,2017

[15]

SHIH T H, LIOU W W, SHABBIR A, et al.A new k-eddy-viscosity model for high reynolds number turbulent flows-model development and validation [J].Computers Fluids, 1995,24(3):227-238 10.1016/0045-7930(94)00032-T