[1] 胡桂川, 朱新才, 周雄. 垃圾焚烧发电与二次污染控制技术.重庆:重庆大学出版社, 2011
[2] 闰涛, 左禹, 张衍国, 等.生活垃圾焚烧特性实验研究.燃烧科学与技术, 2002, 8(6):543-547 Yan T., Zou Y., Zang Y. G., et al. Experimental study on the combustion characteristics of municipal solid waste. Journal of Combustion Science and Technology, 2002, 8(6):543-547(in Chinese)
[3] Leskens M., Van Kesssel L. B. M., Van den Hof P. M. J. MIMO closed-loop identification of an MSW incinerator.Control Engineering Practice, 2002, 10(3):315-326
[4] Yang Y. B., Goh Y. R., Zakaria R., et al. Mathematical modelling of MSW incineration on a travelling bed. Waste Management, 2002, 22(4): 369-380
[5] Chungen Yin, Lasse Rosendahl, Søren K. Kaer, et al. Mathematical modelling and experimental study of biomass combustion in a thermal 108 MW crate-fired boiler. Energy & Fuels, 2008, 22(2):1380-1390
[6] Zhou H., Jensen A. D., Glarborg P., et al. Numerical modeling of straw combustion in a fixed bed. Fuel, 2005, 84(4):389-403
[7] Goh Y. R., Lim C. N., Chan K. H., et al. Mixing, modelling and measurements of incinerator bed combustion. The Second International Symposium on Incineration and Flue Gas Treatment Technology, 1999.4-6
[8] Goh Y. R., Yang Y. B., Zakaria R., et al. Development of incinerator bed model for municipal solid waste incineration. Combust. Sci. and Tech., 2001, 162(1):37-58
[9] Cooper J., Hallett W. L. H. A numerical model for packed-bed combustion of char particles. Chemical Engineering Science, 2000, 55(20):4451-4460
[10] Costa M., Dell'Isola M., Massarotti N.Numerical analysis of the thermo-fluid-dynamic field in the combustion chamber of an incinerator plant. Energy, 2009, 34(12):2075-2086
[11] Yang Y. B., Sharifi V. N., Swithenbank J. Converting moving-grate incineration from combustion to gasification-numerical simulation of the burning characteristics. Waste Management, 2007, 27(5):645-655
[12] Yu Z., Ma X., Liao Y. Mathematical modelling of combustion in a grate-fired boiler burning straw and effect of operating conditions under air-and oxygen-enriched atmospheres. Renewable Energy, 2010, 35(5):895-903
[13] Swithenbank J., Finney K., Chen Q., et al. Waste heat usage. Journal of Applied Thermal Engineering: Special Issue, 2013, 33(1):107-121
[14] Li H., Chen Q., Zhang X., et al. Evaluation of a biomass drying process using waste heat from process industries: A case study. Applied Thermal Engineering, 2012, 35(1):71-80
[15] Zhang X., Chen Q., Bradford R., et al. Experimental investigation and mathematical modelling of wood combustion in a moving grate boiler. Fuel Processing Technology, 2010, 91(11):1491-1499
[16] Hans-Heinz Frey, Bernhard Peters, Hans Hunsinger, et al. Characterization of municipal solid waste combustionin a grate furnace. Waste Management, 2003, 23(8):689-701
[17] Miran Kapitler, Niko Samec, Filip Kokalj.Computional fluid dynamics calculation of waste-to-energy plant combustion characteristics. Thermal Science, 2011, 15(1):1-16
[18] Roper Willian E., Newby Carl. Evaluation of resource recovery through a waste-to-engery plant operating with municipal solid waste. International Journal of Environmental Technology & Management, 2010, 13(1):96-112
[19] Kapitler M., Samec N., Kokalj F. Operation of waste-to-energy-plant optimizations by using design exploration. Advance in Production Engineering & Management, 2012, 7(2):101-112
[20] Zhou X., Torero J. L., Goudeau J., et al. On the propagation of a reaction front through a porous in the presence of an opposed forced flow-application to mixtures characteristic of municipal waste. Combustion Science and Technology, 1995, 110-111(1):123-146
[21] 朱新才, 李鹏, 冯威, 等.生活垃圾机械炉排运动试验研究. 重庆理工大学学报, 2012, 26(3):46-50 Zhu X. C., Li P., Feng W., et al. Experimental study about MSW movement on mechanical grates. Journal of Chongqing University of Technology, 2012, 26(3):46-50(in Chinese)