[1] 陈澈.论述含油钻屑处理技术.科技创新与应用, 2012,5(12):18 Chen Che. Discusses the technologies of processing oily drilling cuttings. Technology, Innovation and Application, 2012,5(12):18(in Chinese)
[2] 谢水祥,蒋官澄,陈勉,等.利用化学强化分离-无害化技术处理废弃油基钻井液.环境工程学报, 2011,5(2):425-430 Xie Shuixiang,Jiang Guancheng,Chen Mian,et al. Using chemical strengthening separation-harmless technology for the treatment of waste oil-based drilling fluid. Chinese Journal of Environmental Engineering, 2011,5(2):425-430(in Chinese)
[3] 许毓,史永照,邵奎政,等.废油基钻井液处理及油回收技术研究.油气田环境保护, 2007,17(3):8-12 Xu Yu, Shi Yongzhao,Shao Kuizheng, et al. Study on waste oil-based drilling fluid treatment and oil recovery technology. Environmental Protection of Oil & Gas Fields, 2007,17(3):8-12(in Chinese)
[4] 王嘉麟,闫光绪,郭绍辉,等.废弃油基钻井液处理方法研究.环境工程,2008,26(4):10-13 Wang Jialin,Yan Guangxu,Guo Shaohui, et al. Study on treating methods for waste oil-based drilling fluid. Environmental Engineering, 2008,26(4):10-13(in Chinese)
[5] 魏平方,王春宏,姜林林,等.废油基钻井液除油实验研究.钻井液与完井液,2005,22(1):12-18 Wei Pingfang, Wang Chunhong, JIiang Linlin, et al. Experimental study on oil removal from waste oil-base drilling fluid. Drilling Fluid and Completion Fluid, 2005,22(1):12-18(in Chinese)
[6] 谢水祥,蒋官澄,陈勉,等.废弃油基钻井液资源回收与无害化处置.环境科学研究,2011,24(5):541-547 Xie Shuixiang, Jiang Guancheng, Chen Mian, et al. Resource recycling and harmless treatment for waste oil-based drilling fluid. Research of Environmental Sciences, 2011,24(5):541-547(in Chinese)
[7] Chaillan F., Chaneau C.H., Point V., et al. Factors inhibiting bioremediation of soil contaminated with weathered oils and drill cuttings. Environmental Pollution, 2006, 144(1):255-265
[8] Chaneau C.H., Rougeux G., Yéprémian C., et al. Effects of nutrient concentration on the biodegradation of crude oil and associated microbial populations in the soil. Soil Biology and Biochemistry, 2005,37(8): 1490-1497
[9] Shang H., Snape C.E., Kingman S.W., et al.Microwave treatment of oil-contaminated North Sea drill cuttings in a high power multimode cavity. Separation and Purification Technology, 2006, 49(1):84-90
[10] Talbi Z., Haddou B., Bouberka Z., et al. Simultaneous elimination of dissolved and dispersed pollutants from cutting oil wastes using two aqueous phase extraction methods. Journal of Hazardous Materials, 2009,163(2-3):748-755
[11] Robinson J.P., Kingman S.W., Snape C.E., et al. Remediation of oil-contaminated drill cuttings using continuous microwave heating. Chemical Engineering Journal, 2009, 152(2-3): 458-463
[12] Robinson J.P., Kingman S.W., Onobrakpeya O. Microwave-assisted stripping of oil contaminated drill cuttings. Journal of Environmental Management, 2008, 88(2): 211-218
[13] 易绍金,向兴金,肖稳发.海上钻井含油钻屑处理技术.中国海上油气工程, 2001,13(6):52-54 Yi Shaojin, Xiang Xingjin, Xiao Wenfa. Treatment and disposal technique for offshore oily drilling cuttings. China Offshore Oil and Gas(Engineering), 2001,13(6):52-54(in Chinese)
[14] Veil J.A., Dusseault M.B. International database for slurry injection of drilling wastes. Developments in Water Science, 2005, 52(6): 539-547
[15] 梁海明.海上钻井与海洋环境保护.海洋科学集刊, 2010,50(2):87-92 Liang Haiming. Offshore drilling and marine environmental protection. Studia Marina Sinica, 2010,50(2):87-92(in Chinese)