医疗废物高温蒸气杀菌工艺中质热传递模型

靳登超; 鲍振博; 刘玉乐; 滕红君

环境工程学报

医疗废物高温蒸气杀菌工艺中质热传递模型

, , ,

靳登超, 鲍振博, 刘玉乐, 滕红君. 医疗废物高温蒸气杀菌工艺中质热传递模型[J]. 环境工程学报, 2011, 5(11): 2605-2609.

引用本文:

靳登超, 鲍振博, 刘玉乐, 滕红君. 医疗废物高温蒸气杀菌工艺中质热传递模型[J]. 环境工程学报, 2011, 5(11): 2605-2609.

Jin Dengchao, Bao Zhenbo, Liu Yule, Teng Hongjun. A model for heat and mass transfer in medical waste sterilization[J]. Chinese Journal of Environmental Engineering, 2011, 5(11): 2605-2609.

Citation:

Jin Dengchao, Bao Zhenbo, Liu Yule, Teng Hongjun. A model for heat and mass transfer in medical waste sterilization[J]. Chinese Journal of Environmental Engineering, 2011, 5(11): 2605-2609.

医疗废物高温蒸气杀菌工艺中质热传递模型

1.
天津中日农村环境·资源合作研究中心，天津 300384； 2.天津农学院机电工程系，天津 300384
3.
天津农学院医务室，天津 300384
基金项目:
国家科技部计划项目（10C26211200155）

天津市科技计划项目（10ZXCXSH03900）
中图分类号: TK124

A model for heat and mass transfer in medical waste sterilization

1.
China-Japan(Tianjin) Collaborative Research Center for the Rural Environment and Resource，Tianjin 300384，China；2. Department of Mechanic and Electronic Engineering，Tianjin Agricultural University，Tianjin 300384，China
3.
Clinic of Tianjin Agricultural University ，Tianjin 300384，China
Fund Project:

摘要: 医疗废物高温蒸气灭菌工艺中，如何使蒸气充分渗透到医疗废物内部是决定杀菌效果的关键。结合实际的操作工艺，以单片物料作为研究对象，将其视为多孔介质，从多孔物料传质传热的基本理论出发，建立了医疗废物内部传质传热数学模型，给出了其解析解，并通过实验验证了所建模型的合理性。
- 医疗废物 /
- 传质传热 /
- 模型
Abstract: Heat and mass transfer are very important in steam sterilization for medical waste treatment．This process was studied using a single piece of medical waste material by considering it as porous media．A theoretical model of heat and mass transfer about steam sterilization of medical waste was established and its analytic result was obtained．The experimental results indicated that the model proposed in this paper is suitable for this process．

点击查看大图

计量

文章访问数: 2274
HTML全文浏览数: 1321
PDF下载数: 932
施引文献: 0

靳登超, 鲍振博, 刘玉乐, 滕红君. 医疗废物高温蒸气杀菌工艺中质热传递模型[J]. 环境工程学报, 2011, 5(11): 2605-2609.

引用本文:

靳登超, 鲍振博, 刘玉乐, 滕红君. 医疗废物高温蒸气杀菌工艺中质热传递模型[J]. 环境工程学报, 2011, 5(11): 2605-2609.

Jin Dengchao, Bao Zhenbo, Liu Yule, Teng Hongjun. A model for heat and mass transfer in medical waste sterilization[J]. Chinese Journal of Environmental Engineering, 2011, 5(11): 2605-2609.

Citation:

Jin Dengchao, Bao Zhenbo, Liu Yule, Teng Hongjun. A model for heat and mass transfer in medical waste sterilization[J]. Chinese Journal of Environmental Engineering, 2011, 5(11): 2605-2609.

医疗废物高温蒸气杀菌工艺中质热传递模型

1. 天津中日农村环境·资源合作研究中心，天津 300384； 2.天津农学院机电工程系，天津 300384
3. 天津农学院医务室，天津 300384

收稿日期: 2010-11-04

基金项目:

国家科技部计划项目（10C26211200155）

天津市科技计划项目（10ZXCXSH03900）

关键词:

医疗废物 /
传质传热 /
模型

摘要: 医疗废物高温蒸气灭菌工艺中，如何使蒸气充分渗透到医疗废物内部是决定杀菌效果的关键。结合实际的操作工艺，以单片物料作为研究对象，将其视为多孔介质，从多孔物料传质传热的基本理论出发，建立了医疗废物内部传质传热数学模型，给出了其解析解，并通过实验验证了所建模型的合理性。

English Abstract

A model for heat and mass transfer in medical waste sterilization

1. China-Japan(Tianjin) Collaborative Research Center for the Rural Environment and Resource，Tianjin 300384，China；2. Department of Mechanic and Electronic Engineering，Tianjin Agricultural University，Tianjin 300384，China
3. Clinic of Tianjin Agricultural University ，Tianjin 300384，China

Received Date: 2010-11-04

Fund Project:

Keywords:

Abstract: Heat and mass transfer are very important in steam sterilization for medical waste treatment．This process was studied using a single piece of medical waste material by considering it as porous media．A theoretical model of heat and mass transfer about steam sterilization of medical waste was established and its analytic result was obtained．The experimental results indicated that the model proposed in this paper is suitable for this process．

全文HTML

参考文献 (0)

下载: 全尺寸图片幻灯片

返回文章

用微信扫码二维码

分享至好友和朋友圈

医疗废物高温蒸气杀菌工艺中质热传递模型

A model for heat and mass transfer in medical waste sterilization

计量

出版历程

医疗废物高温蒸气杀菌工艺中质热传递模型

English Abstract

A model for heat and mass transfer in medical waste sterilization

全文HTML

目录

全文HTML