高级搜索

ASM No.2d模型模拟SBR工艺同步脱氮除磷效能

,  ,  ,  ,  , 

downloadPDF

上一篇

下一篇

杨力, 张盼月, 曾光明, 吴昊, 方金鹏, 邹塞. ASM No.2d模型模拟SBR工艺同步脱氮除磷效能[J]. 环境工程学报, 2008, 2(5): 599-603.
引用本文: 杨力, 张盼月, 曾光明, 吴昊, 方金鹏, 邹塞. ASM No.2d模型模拟SBR工艺同步脱氮除磷效能[J]. 环境工程学报, 2008, 2(5): 599-603.
shu
Yang Li, Zhang Panyue, Zeng Guangming, Wu Hao, Fang Jinpeng, Zou Sai. Simulation of simultaneous nitrogen and phosphorus removal in SBR system by activated sludge model No.2d[J]. Chinese Journal of Environmental Engineering, 2008, 2(5): 599-603.
Citation: Yang Li, Zhang Panyue, Zeng Guangming, Wu Hao, Fang Jinpeng, Zou Sai. Simulation of simultaneous nitrogen and phosphorus removal in SBR system by activated sludge model No.2d[J]. Chinese Journal of Environmental Engineering, 2008, 2(5): 599-603.
shu

ASM No.2d模型模拟SBR工艺同步脱氮除磷效能

  • 1.

    湖南大学环境科学与工程学院，长沙 410082

  • 基金项目:

    教育部新世纪优秀人才支持计划项目（531105050030）

    教育部留学回国人员基金资助项目（757210005）

  • 中图分类号: X703.1

Simulation of simultaneous nitrogen and phosphorus removal in SBR system by activated sludge model No.2d

  • 1.

    College of Environmental Science and Engineering, Hunan University, Changsha 410082

  • Fund Project:

HTML全文

  • 摘要: SBR工艺由于处理上的高效性和操作上的灵活性在世界范围的污水处理领域得到广泛应用。采用国际水质协会1999年提出的ASM No.2d模型，利用matlab作为程序开发工具编制计算模型，并利用该模型对一实验室规模SBR系统进行模拟。模拟过程中动力学和化学计量参数采用ASM No.2d给出的典型参数值，并结合实际SBR系统进行了修正。结果表明，该模型能够较好模拟SBR工艺同步脱氮除磷效能，说明应用ASM No.2d进行SBR系统的模拟能够对SBR系统的优化和控制起辅助作用。
    Abstract: For its high efficiency and flexibility, SBR system becomes a worldwide application in the wastewater treatment. In this study, activated sludge model No.2d given by IAWQ was used for simulation of an experimental SBR system and matlab was used for model compilation and calculation. In the process of simulation, typical parameters given by the ASM No.2d were used as kinetic and stoichiometric parameters and modified with the practical SBR system. The results showed that the simultaneous nitrogen and phosphorus biochemical removal of the SBR system was simulated well by the model. The simulation model is capable of being applied to optimization, control and monitoring of SBR system.
  • 加载中
WeChat 点击查看大图
计量
  • 文章访问数:  1430
  • HTML全文浏览数:  824
  • PDF下载数:  1176
  • 施引文献:  0
出版历程
  • 收稿日期:  2008-01-28
杨力, 张盼月, 曾光明, 吴昊, 方金鹏, 邹塞. ASM No.2d模型模拟SBR工艺同步脱氮除磷效能[J]. 环境工程学报, 2008, 2(5): 599-603.
引用本文: 杨力, 张盼月, 曾光明, 吴昊, 方金鹏, 邹塞. ASM No.2d模型模拟SBR工艺同步脱氮除磷效能[J]. 环境工程学报, 2008, 2(5): 599-603.
shu
Yang Li, Zhang Panyue, Zeng Guangming, Wu Hao, Fang Jinpeng, Zou Sai. Simulation of simultaneous nitrogen and phosphorus removal in SBR system by activated sludge model No.2d[J]. Chinese Journal of Environmental Engineering, 2008, 2(5): 599-603.
Citation: Yang Li, Zhang Panyue, Zeng Guangming, Wu Hao, Fang Jinpeng, Zou Sai. Simulation of simultaneous nitrogen and phosphorus removal in SBR system by activated sludge model No.2d[J]. Chinese Journal of Environmental Engineering, 2008, 2(5): 599-603.
shu

ASM No.2d模型模拟SBR工艺同步脱氮除磷效能

  • 1. 湖南大学环境科学与工程学院，长沙 410082
  • 收稿日期:  2008-01-28
基金项目:

教育部新世纪优秀人才支持计划项目（531105050030）

教育部留学回国人员基金资助项目（757210005）

摘要: SBR工艺由于处理上的高效性和操作上的灵活性在世界范围的污水处理领域得到广泛应用。采用国际水质协会1999年提出的ASM No.2d模型，利用matlab作为程序开发工具编制计算模型，并利用该模型对一实验室规模SBR系统进行模拟。模拟过程中动力学和化学计量参数采用ASM No.2d给出的典型参数值，并结合实际SBR系统进行了修正。结果表明，该模型能够较好模拟SBR工艺同步脱氮除磷效能，说明应用ASM No.2d进行SBR系统的模拟能够对SBR系统的优化和控制起辅助作用。

English Abstract

    全文HTML

参考文献 (0)

返回顶部

目录

/

返回文章
返回

Copyright © 2019 中国科学院生态环境研究中心