B/A法强化处理印染废水工艺条件研究

黎松强; 林穗云; 吴馥萍

环境工程学报

B/A法强化处理印染废水工艺条件研究

, ,

黎松强, 林穗云, 吴馥萍. B/A法强化处理印染废水工艺条件研究[J]. 环境工程学报, 2007, 1(9): 90-93.

引用本文:

黎松强, 林穗云, 吴馥萍. B/A法强化处理印染废水工艺条件研究[J]. 环境工程学报, 2007, 1(9): 90-93.

Li Songqiang, Lin Suiyun, Wu Fuping. Study on forced treatment of printing and dyeing wastewater by the B/A method[J]. Chinese Journal of Environmental Engineering, 2007, 1(9): 90-93.

Citation:

Li Songqiang, Lin Suiyun, Wu Fuping. Study on forced treatment of printing and dyeing wastewater by the B/A method[J]. Chinese Journal of Environmental Engineering, 2007, 1(9): 90-93.

B/A法强化处理印染废水工艺条件研究

1.
嘉应学院化学系，梅州514015
2.
嘉应学院化学系，梅州514016
3.
嘉应学院化学系，梅州514017
基金项目:
广东省教育厅自然科学研究项目（200053）
中图分类号: X703.1

Study on forced treatment of printing and dyeing wastewater by the B/A method

1.
Department of Chemistry，Jiaying University, Meizhou 514015
2.
Department of Chemistry，Jiaying University, Meizhou 514016
3.
Department of Chemistry，Jiaying University, Meizhou 514017
Fund Project:

摘要: 采用B/A法对印染废水处理工艺条件控制进行系列试验。探索了微生物种群与有机污染物降解率的关系。获得了提高水质达标率的数据：COD＜90 mg/L，BOD5＜20 mg/L，挥发酚＜0.5 mg/L，石油类＜0.5 mg/L， NH3-N＜15 mg/L；CN－＜0.5 mg/L，S2－＜1 mg/L，pH在6～9范围内，筛选优化B/A法处理印染废水的工艺设计。
- B/A法 /
- 处理 /
- 印染 /
- 废水 /
- 工艺控制
Abstract: A series of experiments on technological control conditions in printing and dyeng wastewater treatment with B/A method were carried out.The relation between microorganism species groups and degradation rates of organic pollutants was explored.The following data for improving water quality were obtained:COD＜90 mg/L；BOD5＜20 mg/L；volatile phenol＜0.5 mg/L；petroleum ＜0.5 mg/L； NH3-N＜15 mg/L；CN－＜0.5 mg/L；S2－＜1 mg/L；pH=6～9.They provide the experimental basis for the improvement of printing and dyeing wastewater treatment techniques.
- B/A method /
- treatment /
- printing and dyeing /
- wastewater /
- technological control

点击查看大图

计量

文章访问数: 2167
HTML全文浏览数: 1323
PDF下载数: 1357
施引文献: 0

黎松强, 林穗云, 吴馥萍. B/A法强化处理印染废水工艺条件研究[J]. 环境工程学报, 2007, 1(9): 90-93.

引用本文:

黎松强, 林穗云, 吴馥萍. B/A法强化处理印染废水工艺条件研究[J]. 环境工程学报, 2007, 1(9): 90-93.

Li Songqiang, Lin Suiyun, Wu Fuping. Study on forced treatment of printing and dyeing wastewater by the B/A method[J]. Chinese Journal of Environmental Engineering, 2007, 1(9): 90-93.

Citation:

Li Songqiang, Lin Suiyun, Wu Fuping. Study on forced treatment of printing and dyeing wastewater by the B/A method[J]. Chinese Journal of Environmental Engineering, 2007, 1(9): 90-93.

B/A法强化处理印染废水工艺条件研究

1. 嘉应学院化学系，梅州514015
2. 嘉应学院化学系，梅州514016
3. 嘉应学院化学系，梅州514017

收稿日期: 2007-05-08

基金项目:

广东省教育厅自然科学研究项目（200053）

关键词:

B/A法 /
处理 /
印染 /
废水 /
工艺控制

摘要: 采用B/A法对印染废水处理工艺条件控制进行系列试验。探索了微生物种群与有机污染物降解率的关系。获得了提高水质达标率的数据：COD＜90 mg/L，BOD5＜20 mg/L，挥发酚＜0.5 mg/L，石油类＜0.5 mg/L， NH3-N＜15 mg/L；CN－＜0.5 mg/L，S2－＜1 mg/L，pH在6～9范围内，筛选优化B/A法处理印染废水的工艺设计。

English Abstract

Study on forced treatment of printing and dyeing wastewater by the B/A method

1. Department of Chemistry，Jiaying University, Meizhou 514015
2. Department of Chemistry，Jiaying University, Meizhou 514016
3. Department of Chemistry，Jiaying University, Meizhou 514017

Received Date: 2007-05-08

Fund Project:

Keywords:

Abstract: A series of experiments on technological control conditions in printing and dyeng wastewater treatment with B/A method were carried out.The relation between microorganism species groups and degradation rates of organic pollutants was explored.The following data for improving water quality were obtained:COD＜90 mg/L；BOD5＜20 mg/L；volatile phenol＜0.5 mg/L；petroleum ＜0.5 mg/L； NH3-N＜15 mg/L；CN－＜0.5 mg/L；S2－＜1 mg/L；pH=6～9.They provide the experimental basis for the improvement of printing and dyeing wastewater treatment techniques.

全文HTML

参考文献 (0)

下载: 全尺寸图片幻灯片

返回文章

用微信扫码二维码

分享至好友和朋友圈

B/A法强化处理印染废水工艺条件研究

Study on forced treatment of printing and dyeing wastewater by the B/A method

计量

出版历程

B/A法强化处理印染废水工艺条件研究

English Abstract

Study on forced treatment of printing and dyeing wastewater by the B/A method

全文HTML

目录